SMC EliteConnect PCI Card Dokumentacja Strona 1

96| Driver Installation – Option 1 (EZ Installation Wizard – Recommended) Windows 98SE/ME/2000/XP NOTE: Installation processes will require

10 Step 4: Read the License Agreement and click [Yes] to accept the terms and continue. Step 5: Select the destination folder (default folder rec

11 Step 8: Choose the installation folder (default folder recommended), and click [Next>] to continue. Step 9: Click [Next>] to continue.

12Step 10: Click [Next>] to begin copying files. Step 11: Setup has finished the installation. Click [Finish] to exit the wizard. Section 6

137| Driver Installation – Option 2 (Manually) Windows 98SE/ME/2000/XP Section 7.1| Installing SMC2512W-AG PCI Card - Software Setup The device d

14 8. The setup program will automatically identify the running system, install corresponding software, and configure your system for the SMC2512W-A

15Section 7.3 | Installing SMC2536W-AG Wireless Cardbus Adapter Windows 98SE NOTE: Installation processes will require the use of your original, l

16Step 5: Once the system has copied the SMC drivers from the CD, it may then request files from your original Windows disk. Please insert the Windo

17 Windows Me NOTE: Installation processes will require the use of your original, licensed copy of Windows. Please have your Windows CD available BE

18Step 5: You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the SMC2536W-AG will be initialized and ready for use. Windows

1Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC f

19 Step 4: You will then be prompted to enter the location of the drivers. This should be ?:\ndis5x. (Note: The ? equals the letter of your CD-ROM d

20 Step 2: Insert the Driver CD and check the [Include this location in the search] option. Make sure the [Search removable media] option is not che

218 | Utility Installation Windows 98SE/ME/2000/XP This Installation method makes the process as simple and Plug-and-Play as possible. Simply run

22Step 4: You will be given the option to choose the location where the Configuration Utility will be in-stalled. It is recommended to leave this at

23 You have now completed the utility installation process. Click [Finish] to exit the wizard. Step 6: Please shut down your machine. Then insert y

24Link Information: Allows you to view/monitor network status, throughput and wireless channel infor-mation. IP Information: Displays TCP/IP data.

25 When you want to create a new network, you must enter the Profile Name. Also enter the SSID of your network in any of the fields show under "

26You must have a digital certificate installed on your machine. If you do not, you will see the following error message: To configure PEAP, make

27For configuring 802.1x security method, select 802.1x under “Set Security Method”, you will be given the option of using 802.1x EAP Type: TLS, PE

28 Enter the User name and Password. After that click the [Advanced Configuration] button, you can then specify the Server or Domain and Login N

2Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital de

29NOTE: PLEASE CONSULT YOUR NETWORK ADMINISTRATOR FOR ASSISTANCE IN CON-FIGURING THESE ADVANCED SECURITY OPTIONS. In addition to WPA and 802.1x, the

30For WPA-PSK Security, select WPA-PSK under “Set Security Method”, and then click [Configure] to enter your WPA key. After selecting the Configure

31 Under the Profile Management Window, click on [Advanced] tab for advanced configurations. Power Save Mode: Normal, Maximum, Off (Default Off) Ne

32Associated BSS ID: Shows the MAC Address of the associated Access Point Channel: Shows the current operating channel of your WLAN Current Tx Rate:

33 Section 8.5 | Driver Information The Driver Information screen displays the version information.

34 9 | Disable Wireless Zero Configuration in Windows XP It is recommended that you use the SMC2536W-AG Configuration Utility to manage your wir

3510 | SMC Networks EliteConnect Universal SMC2536W-AG Wireless Cardbus Adapter Maximum Distance Table Important Notice Maximum distances posted b

36802.11g Wireless Distance Table Environmental Condition Speed (Mbps) and Distance Ranges 54 48 36 24 18 12 11 9 6 5 2 1 Outdoors: A line-of-sigh

3711 | Troubleshooting Common Installation Problems Problems are often caused by conflicts with other devices installed in the same computer, or sof

38As setup program is provided to automatically identify the running system and install corresponding software driver accordingly. Please refer to a

3its and the Amendment Directive 93/68/ EEC. For the evaluation of the compliance with these Directives, the following standards were ap-plied: • E

3912 | Specifications SMC2512W-AG PCI Card Standards • PCI Local Bus Specification 2.2 • PC Card 95/97 PC-16 Standard Specification • ACPI (P

40Operating Range: • 802.11a - up to 2,145 feet • 802.11b – up to 1,766 feet • 802.11g – up to 1,865 feet Security: • 64-bit, 128-bit, 152-bi

41Media Access Protocol: • CSMA/CA Antenna: • Integrated Patch Antenna Output Power: • 11a mode: 20 dBm +-2dBm at 6~24Mbps 1

42 Operation Systems: • Windows 98SE, ME, 2K, XP Compliance: • Wi-Fi Compliant • FCC part 15 (USA) • IC RSS210 (Canada) • ETSI, EN301 893, EN60950

4313 | Frequently Asked Questions What is a Wireless LAN? A local area network that transmits over the air typically in an unlicensed frequency s

44What is DBI? The ability of the antenna to shape the signal and focus it in a particular direction is called Antenna Gain, and is expressed in ter

4514 | Terminology 10BaseT - Physical Layer Specification for Twisted-Pair Ethernet using Unshielded Twisted Pair wire at 10Mbps. This is the most

46 Fixed IP – (see Static IP) Full-Duplex - Transmitting and receiving data simultaneously. In pure digital networks, this is achieved with two p

47 PPPoE - Point-to-Point Protocol over Ethernet. Point-to-Point Protocol is a method of secure data transmission originally created for dial-up co

41| Overview The new SMC2512W-AG offers some of the highest dual band transmitting power and receive sensi-tivity in the industry. The SMC EliteConn

52| Features • PCI Local Bus Specification Revision 2.2 compliant • 95/97 PC Card Standard compliant • 3.3V or 5V operation • IEEE 802.11a,

6 3| System Requirements • IBM PC compatible computer • An available PCI expansion slot • CDROM drive • Windows 98SE/ME/2000/XP • Minimum of 32

74| Package Contents After unpacking the EliteConnect Universal 2.4GHz/5GHz High Power Wireless PCI Card, check the contents of the box to be sure

85| Getting Started Warning: This network adapter requires a PC and BIOS that supports the PCI Local Bus Specifica-tion v2.2 or later. If you are i